Our protective and marine coatings are developed with one goal in mind: to defend your assets against the harshest environments on earth. These coatings are engineered to provide exceptional protection against corrosion, wear, and environmental damage, ensuring that vessels, machinery, and industrial structures stay in peak condition for as long as possible. Our marine coatings are specifically formulated to withstand the challenging conditions faced by ships, offshore platforms, and underwater structures, protecting them from saltwater, chemicals, and extreme weather conditions.
For industries that rely on heavy-duty machinery and equipment, our industrial protective coatings offer superior resistance to corrosion, abrasion, and chemical exposure. These coatings extend the lifespan of your assets, reducing maintenance costs and preventing premature wear and tear. Whether you’re protecting metal structures, pipelines, storage tanks, or machinery exposed to harsh chemicals, our coatings provide a robust defense against the elements.
In addition to protection, our coatings are designed for performance. We understand that in marine and industrial environments, equipment and structures are subjected to constant stress, which is why we develop products that offer both durability and flexibility. Our anti-corrosion coatings prevent rust and decay in metal surfaces, while our weather-resistant coatings ensure that structures remain protected in even the most extreme conditions.
ROYALPOXY SZ82
HB Fast Curing Splash Zone Epoxy
A two component, high build, amine cured heavy duty epoxy coating.
- A tough anti-corrosive coating for splash / tidal zones, pipelines, bridge / jetty pilings etc.
- An environment friendly, tar-free replacement for coal tar epoxy coatings.
- Excellent fresh water and sea water resistance comparable to coal tar epoxies.
- Excellent anti-corrosive performance.
- Good abrasion resistance and high hardness.
- Fast curing. Able to cure underwater and at low temperatures down to 5ºC.
- Achieves up to 500 microns dry film thickness in a single coat application.
ROYALPOXY 218
High Build Epoxy Intermediate & Finish
A two component, high build epoxy coating specially formulated as a matt build / finish coat.
- A matt intermediate or finish coat for the protection of structural steel in marine and other aggressive environments.
- Excellent anti-corrosive barrier properties.
- Low permeability to moisture.
- Good abrasion resistance.
- Resistant to spillage or splashes of mild chemicals.
- Recommended for use on slip resistant concrete floorings.
ROYALPOXY 218 SEALER
Epoxy Primer
A two component epoxy primer
- An epoxy sealer suitable for use on concrete surface.
- Good penetration into concrete surfaces.
- Good wetting properties and outstanding adhesion to concrete substrates.
- Good chemical and abrasion resistance
- Suitable for over-coating with PU, epoxies, vinyl and chlorinated-rubbers.
ROYALPOXY 610
Epoxy Anti-Corrosive Primer
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
- A general purpose epoxy anti-corrosive primer suitable for use as a blast or holding primer.
- Excellent anti-corrosive performance.
- Good wetting properties and outstanding adhesion to blasted steel.
- Good chemical and abrasion resistance.
- Suitable for over-coating with epoxies vinyl and chlorinated-rubbers.
- Recommended for use as a tie-coat over inorganic zinc silicate coatings.
ROYALPOXY 2300
Marine Epoxy Tie-Coat Sealer
A two pack, tar free modified epoxy tie coat for external hull.
- Promotes excellent adhesion as a tie coat between the anti-corrosive primer and the antifouling or finish coat for external hull.
- Suitable to be used as an intermediate coat in a keel to rail epoxy coating system.
- Can also be used as a sealer coat over.
- Tributytin antifoulings
- Suitable for use at both new buildings, Dry dockings, maintenance and repair.
ROYALPRIME 1000
Alkyd Anti-Corrosive Primer
A single component, anti-corrosive primer based on a modified alkyd resin system and red oxide anti-corrosive pigmentation.
- An anti-corrosive primer or maintenance coating for use in conventional alkyd coating systems.
- Excellent adhesion to steel and aged coatings.
- Can be applied to non-blast cleaned (i.e. hand tooling or power tooling cleaned) surfaces.
- Good anti-corrosive performance.
- Suitable for both interior and exterior exposure.
ROYALPRIME 1000 CHINESE VERSION
醇酸防腐底漆
基于改性醇酸树脂体系和氧化红防腐颜料的单组分防腐底漆。
- 用于传统醇酸涂料体系的防腐蚀底漆或维护涂料。
- 于钢和老化涂层具有出色的附着力。
- 可应用于非喷砂清理（即手工工具或电动工具清理）的表面。
- 良好的防腐性能。
- 适用于内部和外部曝光。
ROYALPRIME 1200
Alkyd QD Red Lead Primer
A single component, anti-corrosive primer based on a modified alkyd resin system and red lead anti-corrosive pigmentation.
- An anti-corrosive primer or maintenance coating for use in conventional alkyd coating systems.
- Excellent adhesion to steel and aged coatings.
- Can be applied to non-blast cleaned (i.e. hand tooling or power tooling cleaned) surfaces.
- Excellent anti-corrosive performance.
- Fast drying with rapid handling features.
- Suitable for both interior and exterior exposure.
- Dry heat resistance up to 90oC.
ROYALPRIME 1300
Alkyd Zinc Phosphate Primer
A single component, anti-corrosive primer based on a modified alkyd resin system and zinc phosphate anti-corrosive pigmentation.
- An anti-corrosive primer or maintenance coating for use in conventional alkyd coating systems.
- Excellent adhesion to steel and aged coatings.
- Can be applied to non-blast cleaned (i.e. hand tooling or power tooling cleaned) surfaces.
- Excellent anti-corrosive performance.
- Suitable for both interior and exterior exposure.
- Dry heat resistance up to 90oC.
