Our protective and marine coatings are developed with one goal in mind: to defend your assets against the harshest environments on earth. These coatings are engineered to provide exceptional protection against corrosion, wear, and environmental damage, ensuring that vessels, machinery, and industrial structures stay in peak condition for as long as possible. Our marine coatings are specifically formulated to withstand the challenging conditions faced by ships, offshore platforms, and underwater structures, protecting them from saltwater, chemicals, and extreme weather conditions.
For industries that rely on heavy-duty machinery and equipment, our industrial protective coatings offer superior resistance to corrosion, abrasion, and chemical exposure. These coatings extend the lifespan of your assets, reducing maintenance costs and preventing premature wear and tear. Whether you’re protecting metal structures, pipelines, storage tanks, or machinery exposed to harsh chemicals, our coatings provide a robust defense against the elements.
In addition to protection, our coatings are designed for performance. We understand that in marine and industrial environments, equipment and structures are subjected to constant stress, which is why we develop products that offer both durability and flexibility. Our anti-corrosion coatings prevent rust and decay in metal surfaces, while our weather-resistant coatings ensure that structures remain protected in even the most extreme conditions.
ROYAL HI – TEMP Z600
Silicone Zinc Heat Resisting Primer
A two component, heat resistant primer formulated based on a modified silicone binder and pigmented with zinc dust.
- A heat resistant primer coating for use on steel substrates subjected to temperatures of up to 600ºC in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures etc.
- Designed to be overcoated with ROYAL HI-TEMP 200, ROYAL HI-TEMP 600 or ROYAL HI-TEMP 220 heat resistant finishes.
- Air dries tack-free at room temperature. Achieves fully cured state on subsequent baking, normally achieved when coated component is brought into service.
- Excellent adhesion to steel with outstanding anti-corrosive performance.
ROYAL HI – TEMP 200
Oleoresinous Heat Resisting Finish (200ºC)
A single component, heat resisting paint formulated based on an air drying oleoresinous binder system and pigmented with aluminium flakes.
- A heat resistant coating for use on steel subjected to temperatures of up to 200ºC in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures etc.
- Also suitable for use as a general purpose aluminium maintenance coating for steel under ambient exposure conditions, e.g. exteriors of bulk storage tanks.
- Excellent adhesion to poorly prepared steel substrates and aged coatings.
- Highly attractive and brilliant aluminium finish.
- Easy to apply and trouble free easy maintenance coating.
ROYAL HI – TEMP 600
Silicone Heat Resisting Finish (600ºC)
A single component, heat resistant finish formulated based on a modified silicone binder and pigmented with aluminium flakes.
- A heat resistant finish coating for use on primed steel substrates subjected to temperatures of up to 600ºC in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures etc.
- Suitable for both new construction and as a maintenance coating.
- Excellent weathering properties and overall durability.
- Air dries tack-free at room temperature. Achieves fully cured state on subsequent baking, normally achieved when coated component is brought into service.
ROYAL HI – TEMP 220
Acrylic Silicone Heat Resistant (220ºC)
A single component, heat resisting paint formulated based on an air drying silicone-acrylic binder system.
- A heat resistant coating for use on steel subjected to temperatures of up to 220ºC in a wide range of industrial environments, e.g. petrochemical plants, power stations, offshore structures etc.
- Outstanding weathering resistance and durability.
- Good chemical resistance.
- Easy to apply and trouble free easy maintenance coating.
ROYALTAR AP 1
Bituminous Anti-Corrosive
A two component black bitumen coating that provides excellent anti-corrosive protection for “Hot-Wet” metal surfaces subjected to very high temperatures.
- An anti-corrosive coating for boiler drums, tubes, evaporators and other equipment subjected to temperatures between 93ºC to 540ºC.
- Low permeability to moisture and steam.
- Waterproof.
- Excellent anti-corrosive performance.
- Resistant to weathering, oxidation and mild acids and alkali solutions.
- Easy application by brush, roller or spray.
- Suitable for surfaces in contact with fresh or salt water.
ROYALTAR AP 3
Bitumen Coating
A single component general purpose black bitumen coating that provides economical protection for steel and concrete.
- An anti-corrosive protective coating for steel and concrete in marine environments e.g. anchor chain areas.
- Low permeability to moisture. Waterproof.
- Excellent anti-corrosive performance.
- Resistant to weathering, oxidation, mild acids and alkali solutions.
- Can be applied to a variety of substrates, e.g. steel, concrete, asbestos etc.
- Easy application by brush, roller or spray.
- Suitable for surfaces in contact with fresh or salt water.
ROYALTAR 5
Coal Tar Epoxy
A high build epoxy polyamide combine with coal tar that has:
- Compatibility with cathodic protection.
- Outstanding resistance to fresh water and salt water.
- Good Wear properties.
- Excellent resistance to chemically polluted water (eg. sewage).
- Protection of steel/concrete pipelines, harbour and shore installations.
- Anti-corrosive coating for submerged or semi-submerged areas e.g. pilling, jetties, dock gates.
- Internal tank lining for crude oil storage tanks.
ROYALTAR 15HS
High Solids Coal Tar Epoxy
A two component, high solids coal tar epoxy anti-corrosive coating.
- An anti-corrosive protective coating that is ideal for total, partial or intermittent submerged structures such as pilings, pontoons, jetties, dock gates etc.
- Outstanding anti-corrosive performance with excellent fresh and seawater resistance.
- Compatible with cathodic protection.
- Good abrasion resistance.
- Able to withstand wet heat of up to 60oC.
ROYALTAR 18HS
High Solids Coal Tar Epoxy
A two component, high solids coal tar epoxy anti-corrosive coating.
- An anti-corrosive protective coating that is ideal for total, partial or intermittent submerged structures such as pilings, pontoons, jetties, dock gates etc.
- Outstanding anti-corrosive performance with excellent fresh and seawater resistance.
- Compatible with cathodic protection.
- Good abrasion resistance.
- Able to withstand wet heat of up to 60oC.
- Able to achieve 400 microns dry film build in a single coat application.
